Material Safety Data Sheet - Printable PDF

1.0 Identity and Manufacturer

Identity:  Epoxy bonded abrasive products

Manufacturer:

 

Anchor Abrasives Company

7651 West 185th Street

Tinley Park, Illinois 60451

 

Date Prepared: October 1, 2005  Reaffirmed 2/26/09

Phone:

(877) 596-3100

(8:00 am - 4:00 pm CST)

 

2.0 Hazardous Ingredients / Indentity Information

Component CAS # OSHA PEL ACGIH TLV Wt. %
Aluminum Oxide 1344-28-1 15 mg/m3 10 mg/m3 50-90
Silicon Carbide 409-21-2 15 mg/m3 10 mg/m3 50-90
Cured Epoxy Resin 25068-38-6 n/a n/a 10-40
Inert Fillers

n/a

 15 mg/m3 15 mg/m3 0-40

 

3.0 Physical / Chemical Characteristics

Boiling Pt: n/a

 

Vapor Pressure: n/a

 

Vapor Density: n/a

 

Solubility In Water: Insoluble

 

Appearance and Odor: White to Grey
solid, no odor

Specific Gravity: 1.5 - 3.0 g/cc

 

Melting Point: n/a

 

Evaporation Rate: n/a

 

 

4.0 Fire and Explosion Hazard Data

Flash Point: n/a

 

Extinguishing Media: Water, Foam,
Dry Chemical, CO2

 

Special Procedures: MSHA?NIOSH approved
self-contained breathing apparatus when in an
enclosed area. Avoid inhalation of gases.

 

Unusual Hazards: Organic dust/air mixtures are
highly flammable. Avoid dust accumulations and
sources of ignition.

Flammable Limits: For Dust

 

LEL: .025 oz./ft3

 

UEL: n/a

 

 

5.0 Reactivity Data

Stability: Stable

 

Conditions to avoid: None Known

 

Imcompatibility: Strong Organic Oxidizers

Hazardous Decomposition: n/a

 

Hazardous Polymerization: Will not occur

 

 

6.0 Health Hazard Data

Routes of entry:     Inhalation: TLV 10 mg/m3
     Skin: n/a
               Ingestion: n/a

Health Hazards:     Acute: Inhalation of dust generated during use may
           cause coughing or shortness of breath.

                      Chronic: Prolonged exposure above TLV may
cause respiratory problems.

Carcinogenicity: n/a

Signs and Symptoms of Overexposure: Choking sensation

Medical conditions aggravated by overexposure: Pre-existing Pulmonary conditions
which are aggravated by nuisance dust.

Emergency and First Aid Procedures: Remove to dust free area.

 

 

7.0 Precautions for Safe Handling and Use

Steps to be taken in case of spill: Collect in most convenient and safe manner for disposal.

Waste Disposal Method: In accordance with Federal, State, and Local regulations as a dry solid.

Storage / Handling Precautions: Handle in accordance with ANSI B7.1
"Safety Requirements for the Use, Care and Protection of Abrasive Wheels"

Other Precautions: Inspect disc for damage upon arrival and prior to mounting.

 

 

8.0 Control Measures

Respiratory Protection: NIOSH approved respiratory protection
recommended if TLV is exceeded.

Venitlation
Local: To remove dust during use  
Gen.: Mechanical Dust collection system  
Spec.: n/a  

Protective Gloves: Suitable for grinding  

Eye Protection: Safety glasses are highly recommended.

Other Protection: As required for a grinding operation.  

Work/Hygienic Practices: n/a

 

 

Disclaimer: All information and recommendations appearing on this Safety Data sheet are based upon data believed to be reliable. It is the user's responsibility to determine the suitability for their own use and to comply with all applicable regulations. No guarantee, either expressed or implied is made by Anchor Abrasives Company as to the safety and toxicity of the product, nor does Anchor Abrasives Company assume any liability arising from the use of this product.